Shed Plan

Block Project Finished For Now

So Teagues blocks are finished - I was aiming for 50 and ended up having time for 46. Not too bad.

Theyre unit blocks, with the basic block having 1x2x2 dimensions. Making these blocks, and their larger siblings, was pretty straight forward - just dimensioning the stock really (well except for a few of the "special" shaped blocks), but it was fun practice.

The width of the stock is very close to the final width of 2 inches, so after planing off the finish (they are old library chairs) it doesnt take much more work to get there with just a jack plane. The thickness is another matter - too much to remove with the jack, and too little to resaw - well, I suppose if I really wanted some thin oak veneer...

I tried my scrub plane, but wasnt happy with the results. Just too much tear out to get close to the layout line. I switched to a #6 fore plane with a fairly cambered iron. It was the right tool for the job, fast, but clean, stock removal. Heres a shot showing two pieces of oak - the right is the "before" and the left is the "after" example.


After the fore plane got things close, it was quick work with the jack to finish removing stock down to the line. It was a little wasteful, but a definite time saver.

I tried to take a picture of the fore plane iron to show the amount of camber:


Heres a shot of work on one pair of ramp blocks:


I had to leave extra wood at the ends to adjust for the kerf and flattening of the angled plane. After everything was true, I cut the ends square and to length. I experimented with several different saws for cutting the angle and ended up liking the Japanese style rip saw the best.

I had anticipated having to do a lot of work with a plane to clean up the cut, but in the end it came out pretty clean straight from the saw. Just a few minutes with the plane, and it was fine.


Chamfering the edges of the blocks was much easier by pulling them over an upside down plane - once again the jack was pressed into service:


The final test of the set before the birthday boy got his hands on them (what can I say, theyre fun!):


In action - I think he liked them, and the chest too:


Im sure I will be making more to expand the set as time goes by and his construction skills grow.